Teac DR-07MKII - Manual (Page 72)

72
TASCAM DR-07MKII
Recording the moment before
pushing RECORD (PRE REC)
By using prerecording, when the unit is in
recording standby you can record up to two
seconds of the signal input before the RECORD
[º] button is pushed to start recording.
1 Press the MENU button to open the
MENU
screen.
2 Use the + or − button to select
REC
SETTING
, and press the Á button.
3 Use the + or − button to select
PRE REC
,
and press the ¯ or Á button.
4 Use the + or − button to select
ON
.
(Default:
OFF
)
5 Press the (HOME) [ª] button to return
to the Home Screen.
TIP
By using this in combination with the AUTO REC function,
you can record events without losing the beginnings of
sounds.
NOTE
If the amount of time in record standby is less than two •
seconds, the sound for that amount of time is recorded.
You cannot use the PRE REC function with overdub
•
recording. The prerecording function is disabled when
you record using overdubbing.
4–Recording