Teac DR-07MKII - Manual (Page 39)

TASCAM DR-07MKII
39
CAUTION
Never use any adaptor other than the designated PS- •
P515U AC adaptor. Use of a different adaptor could cause
malfunction, fire or electric shock.
Noise may occur when recording with a microphone if
•
the unit is too close to the AC adaptor. In such a case, keep
sufficient distance between the AC adaptor and the unit.
NOTE
When both batteries are installed and the AC adaptor is
connected, power will be supplied from the AC adaptor.
Using USB bus power
Connect the unit to a PC using the attached USB
cable as shown in the illustration.
The
USB SELECT
screen appears to choose
between USB bus power for power supply or
connection with a PC through the USB cable
when USB cable is connected after the unit is
turned on or when the unit is turned on after
connecting the USB cable. Use the + or – button
to select
BUS POWER
and press the Á button
to select power supply from the USB port. The
Home Screen will appear.
NOTE
Power is supplied from the USB port if the USB cable is
connected to the unit that contains batteries (USB bus power
prioritized).
3–Preparation
PC
USB (mini B)