Teac SL-D930 - Manual (Page 34)

34 34
Listening to a Bluetooth device
With this unit, you can enjoy listening to music played back
on another Bluetooth device wirelessly.
1
Press the FUNCTION button to select
“BLUETOOTH”.
o The unit will automatically try to connect to the
previously connected device.
o If it cannot connect for two minutes or longer, “NO
DEVICE CONNECTED” will scroll across the display.
o When “NO DEVICE CONNECTED” appears on the
display, press the DISPLAY button to show the time.
“NO DEVICE CONNECTED” display
Time display
o Pairing is necessary before using the Bluetooth
function of this unit for the first time and when you
want to connect a new Bluetooth device.
o When connection with a Bluetooth device suc-
ceeds, two short beeps will sound and the name of
the Bluetooth device will appear on the display of
this unit (page 35).
o If connection fails, confirm that the other Bluetooth
device is ready to make a Bluetooth connection.
o Changing the function when connected will
disconnect.
2
Start playback on the other Bluetooth
device.
If the connected Bluetooth device supports AVRCP,
basic control of that device using this unit and its
remote control should be possible.
Depending on the Bluetooth device being used,
remote control operation might not be supported or
actual operations might differ.