Teac SL-D930 - Manual (Page 21)

21 21
ENGLISH
Setting the clock (1)
Set the current time before using the unit.
You can set the clock both when the unit is on and in
standby.
1
Press and hold the CLOCK ADJUST button
for at least two seconds.
Press and hold for at least 2 seconds
Release the button when “12 H” or “24 H” blinks on the
display.
If you want to change the clock display mode, press
the ,/ button.
o If no button is pressed for 10 seconds, clock setting
mode will end.
2
Press the CLOCK ADJUST button again.
The “hour” value blinks.
3
Press the ,/ button to set the current
hour and press the CLOCK ADJUST button.
The “minute” value blinks.
Continued on the next page