Super Systems SuperDATA Load Entry - Manual (Page 21)

SuperDATA Standard Load Entry Operations Manual
Super Systems Inc. Page 21 of 58
Application
Application options include options for configuring how Standard Load Entry operates.
Figure 22 - Application Options
Login Limit: Select this option to automatically log out any user after the set time limit in
minutes.
Send Subroutines With Recipe: When this option is checked, Standard Load Entry will download
Subroutines and Jump programs referenced in the main recipe. This ensures that Subroutines
and Jump programs referenced in the main recipe are up-to-date in Standard Load Entry.
Allow Unfinished Load Approval: When this option is enabled, the user will have the ability to
mark orders in unfinished loads as approved or rejected before the load is finished running. If
the option is disabled, the user must wait until the load has finished running before orders can
be approved or rejected. Use with Caution!
Allow Operator Comments: When this option is enabled, a user with Operator access is
permitted to add comments to a load entry through the Comments button in the “New Load” tab
or by using the View Details button in the “Load History” tab. When this option is disabled, only a
user with Supervisor or Administrator access is permitted to add comments.
Use Alternate Data: If Standard Load Entry is installed as a workstation and that workstation is
running its own instance of SDIO, a conflict can be created when the workstation’s Load Entry
instance attempts to write channel data. In cases like this, Use Alternate Data must be enabled
on the workstation in order to prevent write conflicts. An Alternate Data Path must be entered if
this option is used. If SDIO is not running separately on the workstation, this option is not
needed and should be disabled.