Super Systems SuperDATA Load Entry - Manual (Page 10)

SuperDATA Standard Load Entry Operations Manual
Super Systems Inc. Page 10 of 58
The software will install. The remaining
screens will confirm the installation.
Figure 9 – Installation Completion Screens
Setup
When run for the first time, Load Entry users, furnaces, processes, recipes, and parts (if
applicable) must be created. To allow for initial setup, Load Entry (when first installed) has a
default administrator login. The default administrator login is as follows:
Username: administrator
Password: 2
This default login can be deleted for security purposes during setup of users. In fact, it is
recommended that the default administrator login be deleted once you have finished setting up
all users.
This manual is written with a suggested order of setting up items. SSi suggests this order based
on the most logical progression of steps for configuring Standard Load Entry. The sections
below detail setup of the following components, in this order: users, furnaces, processes,
recipes, parts, and options.
User Setup
IMPORTANT!
Before running Load Entry for the first time, make sure that the SQL database has been set up
properly. The Load Entry software will not run properly without an associated SQL database that
it can connect to.