Super Systems SuperDATA Load Entry - Manual (Page 15)

SuperDATA Standard Load Entry Operations Manual
Super Systems Inc. Page 15 of 58
• Channel drop-down menu: Selects the SDIO
channel that corresponds to the desired
furnace.
NOTE: The scspsys.cfg file must contain an
SSI9XXX (for example, SSI9205) reference
in order for recipes to be used in Standard
Load Entry.
• Trend Name field: Identifies the trend that
data should be logged to. The box
allows you to browse for a corresponding
trend file.
• Opcode Customization Path field: Identifies
the path to opcode customization files, if
used. The
box allows you to browse for
the path.
• Text Customization Path field: Identifies the
path where custom text files are contained.
The
box allows you to browse for the
path.
• Run Loads Manually (No Recipes): When
this option is enabled, recipes will not be
used for this furnace. All loads will be
charged manually.
• Processes selection area: Allows you to
select which Processes will be associated
with this furnace. Recipes in the associated
Processes can be run on the furnace.
Processes Setup
The Processes tab provides a list of all the Processes configured for use in Standard Load
Entry. Along with the name of each Process, the controller with which the Process is
associated, and whether or not the Process is locked, are displayed. If a Process is locked, the
user cannot make temporary edits to the recipes within that Process before running a load.