Sundance SMT6040 - Manual (Page 40)

Sundance Multiprocessor Technology Limited
Form : QCF32
SMT6040
“Sundance Simulink Toolbox” Date : 6 July 2006
4.7 MIMO_LTE
MIMODemo: It includes a “SimulinkProject” that creates a DSP task from a SMT6040
diagram and a Diamond project that uses this task. More details in this regard in Chapters 3
and 4.
test_SMT362: this demo demonstrates the behaviour of the SMT362 DSP board when
using only one or both DSPs.
Version2\test_SMT351T: here are a demo to test the SMT351T alone (“testLeds.mdl”)
and two demos to be used as examples for the SMT351T+SMT350 combination.
4.8 WiMAX
WiMAXDemo: It includes a “SimulinkProject” that creates a DSP task from a SMT6040
diagram and a Diamond project that uses this task. More details in this regard in Chapters 3
and 4.
test_SMT362: this demo demonstrates the behaviour of the SMT362 DSP board when
using only one or both DSPs.
Version2\test_SMT351T: here are a demo to test the SMT351T alone (“testLeds.mdl”)
and two demos to be used as examples for the SMT351T+SMT350 combination.
4.9 RadioGiga
RadioGigaDemo: It includes a “SimulinkProject” that creates a DSP task from a SMT6040
diagram and a Diamond project that uses this task. More details in this regard in Chapters 3
and 4.
test_SMT362: this demo demonstrates the behaviour of the SMT362 DSP board when
using only one or both DSPs.
Version2\test_SMT351T: here are a demo to test the SMT351T alone (“testLeds.mdl”)
and two demos to be used as examples for the SMT351T+SMT350 combination.
4.10 SMT6040_ generic
This folder contains a simple example for the development procedure described in Chapter 2.
One folder (“SimulinkProject”) contains the SMT6040 diagram used to create a DSP task.
The other folder features a simple DSP-FPGA Diamond example using this DSP task.
4.11 Miscellanea
In the “generic” folder there are some demos for data transfer (in particular via comport or
SHB). Boards targeted are SMT370 and SMT368. These demos should be used as examples
and as general reference for custom designs. They are not meant to demonstrate full
functionality of Sundance systems.
The “obsolete” folder contains a number of obsolete demos that could be taken as examples
for custom designs. However, their use is not supported and we suggest focusing on the other
demos.
SMT6040 - “Sundance Simulink Toolbox” Last Edited: 08/01/2010 15.42 Page 40 of 53