Sundance SMT6040 - Manual (Page 10)

Sundance Multiprocessor Technology Limited
Form : QCF32
SMT6040
“Sundance Simulink Toolbox” Date : 6 July 2006
2-
Run the MATLAB command: Diamond(‘DSP6040’)
This command creates the file “T6040_root.tsk” and runs a Diamond application (that is not
important in this case as the task will be used within a different Diamond project).
2.1.2 Diamond project
The original “fpga-example1” Diamond project had only one DSP task (named “driver”). In
this case, another DSP task is added (named “T6040_root”).
Figure 2: sample DSP diagram
This additional task must have two input and two output ports to match the Simulink
diagram in Figure 2. Moreover, the “Create Main Source File” checkbox must not be ticked
when creating the task.
SMT6040 - “Sundance Simulink Toolbox” Last Edited: 08/01/2010 15.42 Page 10 of 53