Sundance SMT6040 - Manual (Page 33)

Sundance Multiprocessor Technology Limited
Form : QCF32
SMT6040
“Sundance Simulink Toolbox” Date : 6 July 2006
The SMT6040 task is dedicated to process the incoming data from the “main” task and to
output (again to the “main” task) the processing results. The diagram generating the task is
represented in Figure 26 and the processing results of the MIMO Diamond demo (when
calling the T6040_root task) are pictured in Figure 28. In this picture it appears clear that
the “Time domain – Channel 1” output is equal to the sum of two signals identical to the one
displayed as “Time domain – Channel 2”.
3.6 RadioGiga demo
! Demo: “..\Release_3.0\Applications\_Sundance\RadioGiga\RadioGigaDemo”
Same requirements as described in Chapter 2.
This is the recommended demo for Special University Offer RadioGiga users.
Figure 29 : RadioGiga demo (FPGA tasks in red, DSP tasks in yellow)
The diagram represented in Figure 29 pictures the structure of the demo.
SMT6040 - “Sundance Simulink Toolbox” Last Edited: 08/01/2010 15.42 Page 33 of 53