Sundance SMT6040 - Manual (Page 39)

Sundance Multiprocessor Technology Limited
Form : QCF32
SMT6040
“Sundance Simulink Toolbox” Date : 6 July 2006
Version2_OLD\SDR_SMT8036E\test_SMT8036: this folder contains a number of
demos that target both the SMT8036 and SMT8036E systems. All SMT8036E users should
use the “ADC_DSP_DAC.mdl” as a reference demo for this system and as a starting point for
their projects.
Version2_OLD\SDR_SMT8036E\test_SMT370: this folder contains demos that test
the leds and the DAQ functionalities of the SMT370 board.
Version2_OLD\SDR_SMT8036E\test_SMT365E: this folder contains a demo testing
the leds of the SMT365E board. The other demos should only be used as examples for custom
designs.
Version2_OLD\SDR_SMT8036E\test_SMT365: this folder contains a demo testing
the leds of the SMT365 board. The other demos should only be used as examples for custom
designs.
Version2_OLD\SDR_SMT8036E\SignalGenerator: this folder contains a useful
demo to test the SMT370 module. Please follow the instructions provided with the SMT6040.
The other folders in Version2_OLD \SDR_SMT8036E (DownConversion,
FMtransmitter, FrequencyModulation) include examples that advanced users can take
as reference diagrams for their designs.
4.5 Video
To design complete applications (including Video I/O) targeting Sundance Video kit and
Sundance VisionMax kit, the SMT6040 has to be used together with Diamond Video Library.
VideoDemo: it includes a “SimulinkProject” that creates a DSP task from a SMT6040
diagram and a Diamond project (“VideoDemo”) that uses this task. More details in this
regard in Chapters 3 and 4. It should be considered as the main Getting Started demo for the
Video kit.
Version2\test_SMT8039: it contains an example targeting the SMT8039 system. It
illustrates how to create a DSP application using the SMT6040 and a default FPGA firmware
(without Diamond). It is a simple example and is not optimised, so performance is low.
4.6 DVIP
To design complete applications (including Video I/O) targeting Sundance DVIP kit, the
SMT6040 has to be used together with Diamond Video Library.
DVIPDemo: It includes a “SimulinkProject” that creates a DSP task from a SMT6040
diagram and a Diamond project that uses this task. More details in this regard in Chapters 3
and 4. It should be considered as the main Getting Started demo for the DVIP.
Version2\test_SMT8039: it contains an example targeting the SMT8039 system. It
illustrates how to create a DSP application using the SMT6040 and a default FPGA firmware
(without Diamond). It is a simple example and is not optimised, so performance is low.
test_SMT362: this demo demonstrates the behaviour of the SMT362 DSP board when
using only one or both DSPs.
SMT6040 - “Sundance Simulink Toolbox” Last Edited: 08/01/2010 15.42 Page 39 of 53