Sloan 952 Royal Concealed 900 Hydraulic Series - Manual (Page 3)

3
1- INSTALL OPTIONAL SWEAT SOLDER ADAPTER (ONLY IF YOUR SUPPLY PIPE DOES NOT HAVE A MALE
THREAD) AND INSTALL CONTROL STOP
A
For Sweat Solder applications,
slide Threaded Adapter onto
water supply pipe until end
of pipe rests against shoulder
of Adapter. Sweat solder the
Adapter to water supply pipe.
Install the Sloan Bak-Chek ®
control stop to the water
supply line with the outlet
positioned as required.
B
BAK-CHEK ®
CONTROL STOP
OUTLET
IRON PIPE NIPPLE
OR COPPER PIPE
WITH SWEAT
SOLDER ADAPTER
THREADED
ADAPTER
WATER
SUPPLY
PIPE
MODEL 990
14-1/2”
(368 mm)
13”
(330 mm)
2-1/4”
(57 mm)
MIN.
CENTERLINE
OF FIXTURE
PUSH BUTTON
(LOCATION
OPTIONAL)
2” (51 mm)
OPENING IN WALL
FIN. WALL
4-3/4”
(121 mm)
1” I.P.S.
(25 mm DN)
WATER
SUPPLY
1-1/2” (38 mm)
OPENING IN WALL
FIN.
FLOOR
MODEL 995
13-1/2”
(343 mm)
12”
(305 mm)
2-1/4”
(57 mm)
MIN.
CENTERLINE
OF FIXTURE
PUSH BUTTON
(LOCATION
OPTIONAL)
2” (51 mm)
OPENING IN WALL
FIN. WALL
4-3/4”
(121 mm)
3/4” I.P.S.
(20 mm DN)
WATER
SUPPLY
1-1/2” (38 mm)
OPENING IN WALL
FIN.
FLOOR
ROUGH-INS (CONTINUED)
CAREFULLY READ THIS MANUAL TO ENSURE PROPER PRODUCT
INSTALLATION AND LONGEVITY. ALSO, PLEASE VISIT OUR WEBSITE
WWW.SLOANVALVE.COM TO DOWNLOAD OUR MOST RECENT
DOCUMENTATION FOR THIS PRODUCT.
!!! IMPORTANT !!!
PROTECT THE FINISH OF SLOAN FLUSHOMETERS. DO NOT USE
TOOTHED TOOLS TO INSTALL OR SERVICE VALVES. USE A SLOAN
A-50 SUPER WRENCH™, SLOAN A-109 PLIER WRENCH OR SMOOTH
jAWED SPUD WRENCH TO SECURE COUPLINGS. SEE “CARE AND
CLEANING” SECTION OF THIS MANUAL.
NEVER OPEN THE CONTROL STOP TO WHERE THE FLOW FROM
THE VALVE EXCEEDS THE FLOW CAPABILITY OF THE FIXTURE. IN
THE EVENT OF A VALVE FAILURE, THE FIXTURE MUST BE ABLE TO
ACCOMMODATE A CONTINUOUS FLOW FROM THE VALVE.
!!! IMPORTANT !!!
WITH THE EXCEPTION OF THE CONTROL STOP INLET,
DO NOT USE PIPE THREAD SEALANT OR PLUMBING
GREASE ON VALVE COMPONENTS OR COUPLINGS.
!!! IMPORTANT !!!
THIS PRODUCT CONTAINS MECHANICAL AND/OR ELECTRICAL
COMPONENTS THAT ARE SUBjECT TO NORMAL WEAR. THESE
COMPONENTS SHOULD BE CHECKED ON A REGULAR BASIS AND
REPLACED AS NEEDED TO MAINTAIN THE VALVE’S PERFORMANCE.
!!! IMPORTANT !!!
IF YOU HAVE QUESTIONS ABOUT HOW TO INSTALL YOUR SLOAN
FLUSHOMETER, CONSULT YOUR LOCAL SLOAN REPRESENTATIVE, OR
CALL THE SLOAN TECHNICAL SUPPORT AT:
1-888-SLOAN-14 (1-888-756-2614)
!!! IMPORTANT !!!
WHEN ORDERING, SPECIFY THE MODEL VARIATION REQUIRED.
NOTE: WATER CLOSET VALVES WITH “-2.4” MODEL DESIGNATION
DELIVER 2.4 GPF (9.0 LPF).
!!! IMPORTANT !!!