V = 2 . 0 0 0 k v, S a v e, T e s t – Seaward Sentinel User Manual

Page 14

ELECTRICAL SAFETY TESTER

USER MANUAL

4. Use FIELD key to change active parameter.

5. Repeat step 3 and 4 to adjust parameter.

6. After setting all parameters, press EDIT/SAVE key to save the step.

The status will become SAVE. After the step is saved, the status will

return to EDIT.

7. Repeat the procedure “To View the Storage Steps” to select another step.

FIELD

V = 2 . 0 0 0 k V

EDIT/SAVE

S A V E

ELECTRICAL SAFETY TESTER

USER MANUAL

z To Begin a Group Test

1. Repeat the procedure “To View the Storage Steps” to select a step.

2. Press RESET button to enter status READY.

3. Make sure the test environment is safe.

4. Press START button to start the test while the status TEST is active

and the CAUTION LED flashes.

START

T E S T

R E A D Y

RESET