Seaward 250 PrimeTest - Manual (Page 39)

PrimeTest 250+ Operating Instructions
37
4.6 Setting the Real Time Clock
Setting time and date:
Ensure that the PrimeTest 250+ is powered off.
Press and hold the RECALL key and then press
simultaneously the class I and class II keys to
power on the tester.
The date format and time format is shown as follows:
MM.DD = month (1-12). Day (1-31)
YYYY = year
HH.mm = hours (0-23).minutes (0-59)
SS = seconds (0-59)
Press the class I key to select a date fi eld and time
fi eld.
A fl ashing digit shows that this fi eld can be set.
The save key and recall key are used to increase or
decrease the value in each fi eld, the second fi eld is
set to zero.
Turn off the device to save the setting.