Seaward Europa Pac Plus - Manual (Page 26)

DC Earth Continuity Tests
20
Press the SELECT button to change to another setting or press the
START/STOP button to perform the test if the other settings are
acceptable.
Test Limit
With the secondary display flashing and indicating resistance (
Ω
displayed), use the cursor keys to step through the test limits
available and stop with the appropriate limit displayed.
A special limit indicated by a plus sign (+) to the left of the limit, is a
user adjustable limit.
To set your own limit, with this user adjustable limit flashing press
both cursor keys together. The limit as a whole will stop flashing with
the most significant digit flashing. Use the cursor buttons to set a
value for the flashing digit. Press the SELECT button to enable the
next digit in turn to flash. Use the cursor buttons to set a value for this
flashing digit. Then press the SELECT button to move to the next
digit. Repeat these actions until all digits are set to your chosen
value. Press the STORE RESULT button to set the limit.
Press the SELECT button to change to another setting or press the
START/STOP button to perform the test if the other settings are
acceptable.
DC Earth Continuity Tests
Switch Position
----------
Earth Continuity
Test Icon Displayed ---
Class 1 (earthed) appliances
Plug the EUT into the tester outlet socket, connect the Earth
Continuity lead from its socket to the appliance metal part.