Scotsman NME654R - Manual (Page 9)

FOR THE PLUMBER
CONFORM TO ALL APPLICABLE CODES
Water Inlet
The recommended water supply is
cold water. Use 3/8" O.D. copper
tubing, connect to the 3/8" male flare
at the back of the cabinet. Install a
hand valve near the machine to
control the water supply.
Drains
There is one ¾ " FPT drain at the
back of the cabinet, the drain line is of
the gravity type, and ¼ inch per foot
fall is an acceptable pitch for the drain
tubing. There should be a vent at the
highest point of the drain line, and the
ideal drain receptacle would be a
trapped and vented floor drain. Use
only ¾ " rigid tubing.
Storage Bin: Install a separate
gravity type drain. Insulation of this
drain line is recommended.
NME654R & FME804R
January 2000
Page 9
FLOOR DRAIN
VENT BIN DRAIN
3/4" FPT
VENT ICE
MACHINE
DRAIN, 3/4"
FPT
WATER INLET
3/8" MALE
FIELD SUPPLIED
WATER FILTER
HAND SHUT
OFF VALVE
CONNECT TO
COLD WATER