Scotsman FME24RLM - Manual (Page 2)

FOR THE INSTALLER: Specifications
The machine is designed to fit a variety of
Scotsman storage bins such as BH800 or SB480.
Installation Limitations: The machine is designed
for indoor installations only.
Minimum Maximum
Air Temp 50 o F 100 o F
Water Temp 40 o F 100 o F
Voltage 198 VAC 253 VAC
Water Pressure 20 psi 80 psi
RO Water Limitation: Water conductivity must be
no less than 35 microSiemens/cm.
SPECIFICATIONS:
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of U.L., N.S.F., and C.U.L.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any parts and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and designs are subject to change
without notice.
Double System RL
January 2004
Page 2
15.53"
3.1"
SUCTION LINE CONNECTION 7
8
"
LIQUID LINE CONNECTION 1
2
"
20.84"
9.43"
5.25"
3"
17.8"
18.8"
21.66"
ELECTRICAL INLET
POTABLE WATER INLET 3/8" FLARE
DRAIN 3/4" FPT
BACK VIEW
Model Cabinet Size System Refrigerant BTUH required* Voltage Ice Type
FME2404RL 42"w x 27"h x 24"d R-404A 12,000 208-230 Flake
NME1854RL same R-404A 12,000 208-230 Nugget
FM2402RL-C same R-22 12,500 208-230 Flake
NM1852RL-C same R-22 12,500 208-230 Nugget
FME3004RL same R-404A 15,000 208-230 Flake
NME2504RL same R-404A 15,000 208-230 Nugget
* Use to determine needed condensing unit capacity. Not an AC load.