Scotsman FME24RLM - Manual (Page 15)

SENSOR MAINTENANCE
1. The bin control uses devices that sense light,
therefore they must be kept clean enough so that
they can “see”. At least twice a year, remove the
bin control sensors from the base of the ice chute,
and wipe the inside clean, as illustrated.
2. The ice machine senses water level by a probe
located in the water reservoir. At least twice a year,
the probe should be removed from the reservoir,
and the tip wiped clean of mineral build-up.
Double System RL
November 2000
Page 15
CLEAN THE ICE
LEVEL CONTROL
SENSORS
SLIDE ICE LEVEL
CONTROLS OUT
OF CHUTE
Clean the Probe's Tip with ice
machine cleaner and a clean,
soft cloth.