beautypg.com

How to switch between preview and program, System setup and operations – RGBLink MVP 8043 User Manual User Manual

Page 74

background image

5. System Setup and Operations

How to Switch Between Preview and Program

MVP 8043 User Manual 74

How to Switch Between Preview and

Program

1. Boot the system default DVI1 to the current input source (key lights),

LCD displays as follows:

2. Choose any other signal, for example, DVI2, DVI2 button flashes,

red frame of HDVI2 corresponding image flashes, and the image is in

Preview state.

3. Push TAKE, DVI2 key lights, and it is switched to Program output,

and the former DVI1 key blinks. red frame of DVI1 corresponding

image flashes, the image is in Preview state.

The same method, it can realize the preview and program switching

among DVI3, DVI4, SDI1, SDI2, SDI3, SDI4.

Take operation

DVI 1: 1280×1024×75

DVI 2: 1920×1080×60