RGBLink MVP 8043 User Manual - Manual (Page 69)

5. System Setup and Operations
How to Realize Signal Switching
MVP 8043 User Manual 69
How to Realize Signal Switching
Boot the system default DVI1 to the current input source (key lights), LCD
displays as follows:
If need switch to other source such as SDI1, push SDI1 button, key
flashes, again push TAKE button, SDI1 key lights, and switch SDI1 to
Program output, LCD displays as follows:
After choose SDI1 signal, the former button DVI1 flashes, and SDI1 key
lights, it realize the input signal switching (Switch input signal DVI1 to
SDI1).
The same method can switch DVI2, DVI3, DVI4, SDI2, SDI3, SDI4.
Take operation
SDI 1: 1280×720×60
DVI 1: 1280×1024×75
Take operation
DVI 1: 1280×1024×75
DVI 2: 1920×1080×60