Menu---system, Menu---reset, System – RGBLink MVP 8043 User Manual User Manual

Page 41: Reset, Menu orientation

4. Menu Orientation

MVP 8043 User Manual 41

Brightness: User can adjust the brightness within 0~128.

Signal Backup: User can choose open or close this function.

Preview Mode: User can choose mode 1 or mode 2.

Input Name: User can choose open or close this function.

Preview Border: User can choose open or close this function.

White Border: User can choose open or close this function.

Delay Call: Including call time and call index:

Call Time: Call time setting.

Call Index: Call index, can choose among 1 to 10.

Select System, push the knob to confirm, show level 2 menus as follows:

Language: Rotate the knob, can choose the language English or Chinese.

Modify IP: Modify IP address.

MCU VER: Show the MCU version.

FRONT FPGA: Show the FRONT FPGA version.

BACK FPGA: Show the BACK FPGA version.

SN: Show the serial number.

Enter Reset to reset the IP, and push the knob to confirm, and MVP 8043 is

reset to its factory settings. After 5 seconds, it completes factory settings

and is ready for more operations.