RGBLink MVP 8043 User Manual - Manual (Page 53)

5. Communication Software Guideline
How to Connect Upper Monitor by LAN Interface
MVP 8043 User Manual 53
How to Connect Upper Monitor by LAN
Interface
First, install the upper computer software in the computer.
Connect MVP 8043 and computer with cable, the connection diagram is
as follows:
Power on MVP 8043, start the network function, specific steps are as
follows: MENU--SYSTEM -- Modify IP, select ON, and check the IP
address of the equipment, confirm if it is consistent with the
computer, such as 192.168.0.***, take 192.168.0.100 for example.
Open the upper computer software, click , interface is shown as
follows: