RGBLink MVP 8043 User Manual - Manual (Page 68)

5. System Setup and Operations
How to Adjust the Output Resolution
MVP 8043 User Manual 68
4. Push the knob to confirm.
5. Turn knob on each bit position, and change the value of the bit by the
digital buttons on the front panel. For example, input 1536 as following:
6. After the digital push knob will add ×, means before × is the horizontal
size. Same operation for vertical size, for example input 1536 as
Following:
7. After the digital push knob will add @, means before @ is the vertical
size. Same operation by push digital buttons to set the refresh rate. For
example to input refresh rate 60:
8. After input all the values, push knob to enable MVP 8043 to output this
resolution. MVP 8043 will take 5 to 10 seconds to enable this output
resolution.
Program
Preview
Screen
Program Format
Program Custom Format
Program Timing
CUSTOMIZED
1920×1080@60
CUSTOMIZED
*1536×1536@
CUSTOMIZED
1536×1536@60
CUSTOMIZED
*1536×