RGBLink MVP 8043 User Manual - Manual (Page 26)

2. Hardware Orientation
MVP 8043 Back Panel
MVP 8043 User Manual 26
4 SDI inputs, and 1 Genlock Input.
1~4：DVI Input
DVI 1/2/3/4 input. Input the video signal from HD player, DVD, and
computer. Connect to the DVI interface on MVP 8043.
(This Connection does not support hot-plugging).
Note
DVI-I is compatible with HDMI.
9~12：SDI Input
SDI input, can receive video signal from HD player, and HD camera.
Connect interface 9~12 via 75 ohms BNC port., and connect LED screens
via network cable.
13：Genlock Input
Genlock input, can receive video signal from controller or signal generator,
etc.
OUTPUT Interface
5：Preview SDI Output
Preview SDI output, connect to the display with SDI interface.
Support resolution: 1280x720@50Hz, 1280x720@60Hz.
6：Program SDI Output
Program SDI output, can connect to the next display or send signal to
LED through sending card. Output signal through SDI interface.
Support resolution:
720x480@60i, 720x576@50i, 800x600@60, 1024x768@60,
1280x720@24, 1280x720@25, 1280x720@30, 1280x720@50,
1280x720@60, 1280x768@60, 1280x800@60, 1280x1024@60,