RGBLink MVP 8043 User Manual - Manual (Page 33)

2. Hardware Orientation
MVP 8043 Front Panel
MVP 8043 User Manual 33
Move effect shortcut key 1, user can set the move effect in MENU, then
push the button, its LED light flashes, choose the signal to be switched, and
push TAKE button to achieve move effect switching.
Move effect shortcut key 2, user can set the move effect in MENU, then
push the button, its LED light flashes, choose the signal to be switched, and
push TAKE button to achieve move effect switching.
Signal, Black and Effect switch button, choose the signal and effect, and
push TAKE button to get the switch effect.
Push the button to save user data. When the key lights on, together keys of
DVI1, DVI2, DVI3, DVI4, SDI1, SDI2, SDI3, SDI4, BLACK, TP will light on,
the corresponding numbers 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 are the saving mode
1~10, select the number as the route to save the current user data, LCD
screen will present the saving state. After saving, the chosen key keeps on,
and all the other keys light off. For example, choose SAVE1:
Push the button to load the saved user data. When the key lights on,
together keys of DVI1, DVI2, DVI3, DVI4, SDI1, SDI2, SDI3, SDI4, BLACK,
TP will light on, the corresponding numbers 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 are the
saving mode 1~10 that can be loaded, select the wanted number. After
loading, the chosen key keeps on, and all the other keys light off. For
NOTICE
Press <0~9> to save.
NOTICE
Save to <1> finish.