RGBLink MVP 8043 User Manual - Manual (Page 61)

5. System Setup and Operations
Interface and Signal Option
MVP 8043 User Manual 61
7. Preview DVI Output, output can be programmed as preview output,
output DVI signal, connect to the display with DVI-I interface.
Note
DVI-I is compatible with HDMI.
Support resolution: 1280x720@50Hz, 1280x720@60Hz.
8. Program DVI Output, can connect with next displayer or send signal to
LED through sending card. Output signal through DVI-I interface.
Note
DVI-I is compatible with HDMI.
Support resolution:
720x480@60i, 720x576@50i, 800x600@60, 1024x768@60,
1280x720@24, 1280x720@25, 1280x720@30, 1280x720@50,
1280x720@60, 1280x768@60, 1280x800@60, 1280x1024@60,
1360x768@60, 1366x768@60, 1440x900@60, 1400x1050@60,
1600x1200@60, 1680x1050@60, 1920x1080@50i, 1920x1080@60i,
1920x1080@24, 1920x1080@25, 1920x1080@30, 1920x1080@50,
1920x1080@60, 1920x1200@60, 2048x1152@60, 2560x816@60.
1~4. DVI 1/2/3/4 Input: Input the video signal from HD player, DVD, and
computer. Connect to the same DVI interface on MVP 8043.
(This Connection does not support hot-plugging).
Note
DVI-I is compatible with HDMI.
9~12. SDI Input: Can receive video signal from HD player, and HD camera.
Connect interface 16 via 75 ohms BNC port., and connect LED screens via
network cable.
13. Genlock Input: can receive video signal from controller or signal
generator, etc.
15. USB Interface: Used to device upgrade.