RGBLink CP 3072 User Manual User Manual

Page 70

CP 3072 User Manual 70

Note: If not recognize the serial port, please check if install the USB driver correctly.

User can download the VCP_V1.3.1_Setup.exe file after install the USB driver.

Choose the system type (32 bit or 64 bit). User can also download the driver wizard or

driver home on internet to test and install the driver.

(4) After choose the serial port, show the log option as

, choose

“Pithy”, then click

button, when prompt

choose the upgrade file, ( the form of the file is

.bin.bin ), and click “Start” to upgrade

core processing firmware.

(5) When prompt “Down Load Success”, it means load is successful.

(6) Reboot the device.