RGBLink CP 3072 User Manual - Manual (Page 38)

CP 3072 User Manual 38
Safety Precautions
For all CP 3072 processor installation procedures, please observe the
following important safety and handling rules to avoid damage to yourself
and the equipment.
 To protect users from electric shock, ensure that the chassis connects
to earth via the ground wire provided in the AC power Cord.
 The AC Socket-outlet should be installed near the equipment and be
easily accessible.
Unpacking and Inspection
Before opening CP 3072 process shipping box, inspect it for damage. If
you find any damage, notify the shipping carrier immediately for all claims
adjustments. As you open the box, compare its contents against the
packing slip. The packing slip includes 1 power cord, 1 USB cable, 1 9-pin
serial cable, 2 HDMI to DVI cables, 1 U disk and 1 parts bag, which include
1 PVC bag, 1 CP 3072 silkscreen, 1 standard screwdriver, 2 blank key
caps and 2 T-bar gasket. If you find any shortages, contact your sales
representative.
Once you have removed all the components from their packaging and
checked that all the listed components are present, visually inspect the
system to ensure there was no damage during shipping. If there is damage,
notify the shipping carrier immediately for all claims adjustments.
To prevent the damage, we pack the flight case in an additional carton.
Carton damage is not within the scope of warranty.
Site Preparation
The environment in which you install your CP 3072 should be clean,
properly lit, free from static, and have adequate power, ventilation, and
space for all components.