beautypg.com

How to realize the blend setting, System setup and operation – RGBLink CP 3072 User Manual User Manual

Page 56

background image

5. System Setup and Operation

How to Realize the BLEND Setting

CP 3072 User Manual 56

How to Realize the BLEND Setting

1. First, set PIP mode, or user can not set blend.

2. Push the [BLEND] button in BLEND Operation Area, the OLED panel

shows as follows:

3. Turn the knob, and choose , push the knob to confirm.

Turn the knob, choose “ON”, push the knob to confirm.

4. Turn the knob, and choose , push the knob to

confirm. Turn the knob to set the blend width.

5. If image quality distorts by improper operation, it can be recover by

reset.

>BLENDING ON

BLEND WIDTH 10

RESET

See also other documents in the category RGBLink Equipment: