RGBLink CP 3072 User Manual - Manual (Page 59)

5. System Setup and Operation
How to Load the Saved Parameter
CP 3072 User Manual 59
How to Load the Saved Parameter
There are 4 pages and each page has 4 save modes, CP 3072 provides 16
save modes for load.
1. Push the [LOAD] button, the button light turns on, and PAGE, 1, 2, 3 and
4 button light flash.
2. First set PAGE, for example, choose 1:
3. Then set BANK, buttons 1 to 4 are on or flash, the button on is ready for
recall and flash means just recall, push the button on to recall. For
example, choose 1:
LOAD FROM
>PAGE: 1
BANK: 1
Push No. 1/4 To Select PAGE!
LOAD FROM
PAGE: 1
>BANK: 1
Push No. 1/4 To Select BANK!
LOAD FROM PAGE 1 BANK 1 Finish!