RGBLink CP 3072 User Manual - Manual (Page 54)

5. System Setup and Operation
How to Set up the PIP
CP 3072 User Manual 54
How to Set up the PIP
Push the [PIP] button in PIP Operation Area, and enter to the PIP function
menus. Turn the knob and choose option, push the knob to confirm. Turn
the knob, choose ON to enable the PIP function.
LAYOUT: There are 7 kinds of PIP layouts, PIP L+T, PIP R+T, PIP L+B, PIP
R+B, PIP CENT, PBP L+R and PBP T+B. Take 3 results for example, shown as
follows:
PIP L+T PBP L+R PBP T+B
SELECT: Choose the channel for operation, user can choose the channel of A
BUS or B BUS.
>PIP ON
LAYOUT PIP L+T
SELECT A BUS