beautypg.com

RGBLink CP 3072 User Manual User Manual

Page 69

background image

CP 3072 User Manual 69

Figure 6

(6) Exit the program after upgrade, and power off, then dial the dial switch downwards.

2. Core Processing Firmware Upgrade

Upgrade by windows control program ”UpdateProgram.exe”, the form of the file is.bin.bin,

and upgrade steps are as follows:

(1) Connect the USB interface of CP 3072 to the computer with a USB cable.

(2) Plug in the power cord, and make sure the device is in normal operation.

(3) Open the windows control program, click the serial icon

on top left corner to

set the serial, choose the serial port that connected to the computer, and set BaudRate

as 115200, click “OK” after setting.