System setup and operation – RGBLink VSP 5162PRO User Manual

Page 80

6. System Setup and Operation

How to Realize the Preview and Program Output Switching

VSP 5162PRO User Manual 80

VSP 5162PRO can realize seamless effects switch between two channels,

choose the signal in Preview area, then push [CUT] or [TAKE] button, the

signal will be switched to LED display.

For example, switch the signal of channel 2 to LED display, first push the [2]

button in Preview area, then push the [CUT] or [TAKE] button, and the LED

display will show channel 2 signal.

System default the switch time is 1 seconds for [TAKE] button, if need to

adjust the fade in fade out time, push the [FADE] button, then push the

[UP/DOWN] or [LEFT/RIGHT] button for setting, and push the [SEL] button

to confirm. Push [TAKE] button again, the signal will be switched to the

LED display with the adjusted time.

User can also switch the signal by pushing the signal button in Program

area, but the signal in monitor will not change.