How to program the input signal, System setup and operations – RGBLink VSP 5162PRO User Manual

Page 79

6. System Setup and Operations

How to Program the Input Signal

VSP 5162PRO User Manual 79

1. Push any button of [1], [2], [3], [4] in Preview area, and choose the input

signal.

2. Push [PRO] button, then finish the input signal program.

For example, program DVI1 signal, first push [4] button, the LED light is on,

then push [PRO] button, the OLED panel shows as follows:

Note

If choose the same signal in Program and

Preview area, the signal can not be

programmed.

—>PROGRAM SOURCE DVI1