RGBLink VSP 5162PRO - Manual (Page 107)

VSP 5162PRO User Manual 107
IP Software Download Instruction
Turn off the power, take the two coding switch to ―ON‖ state as below:
Connect one side of the RJ11 download line to the RS-232 on the video
processor, and the other side being connected to the serial port on the PC.
Double click to run flash magic, setting as below:
Firstly, users can choose the right serial port, set the Boud rate to 9600,
choose LPC2368, and to load the aim document (hex file) for IP board
upgrading;
Secondly, tick the item below to confirm.
Finally, click the ―start‖ button.