RGBLink VSP 5162PRO - Manual (Page 47)

4. Menu Orientation
MENU
VSP 5162PRO User Manual 47
OUTPUT: User can choose PROGRAM or PREVIEW.
DVI MODE: Can select HDMI agreement or DVI, system default is DVI
output.
BIT DEPTH: Bit depth setting, system default as 8 bit for DVI signal, user
need not set it. And system default as 10 bit, user can also choose 8 bit or
12 bit.
DATE RANGE: DVI1 out range adjustment can choose RGB or YCBCR;
among them the RGB adjusting range is between 0-255, YCBCR adjusting
range from 16 to 235.
DE ADJUST: DE adjust, the sub-menu as following:
DE ON/OFF: Can choose to open or close, when choose open, it can be
adjusted to DE, as follows:
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
H SIZE: Width setting.
V SIZE: Height setting.
H POLARITY: Horizontal polarity setting.
V POLARITY: Vertical polarity setting.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
DVI2: The operations are the same with DVI1.
VGA: Can choose program or preview.
DSK SETUP: DSK function, settings as follows:
DSK: Can select
―ON‖ or ―OFF‖, OFF is the default state.
SELECT INPUT: Select the input signal.
PRESET: Can preset value of the following functions, and total 13 modes:
User: User mode.
WhOnBk1: White On Black 1.
WhOnBk2: White On Black 2.