RGBLink VSP 5162PRO - Manual (Page 45)

4. Menu Orientation
MENU
VSP 5162PRO User Manual 45
VGA ADJUST: Adjust VGA input signal, sub menu as follows:
AUTO ADJUST: Auto adjust VGA input signal H POS, V POS, CLOCK,
PHASE, auto adjust to display in full screen image.
Note
Comments customers to use this operation in
adjusting the VGA input shiftment.
H POS: Adjust the horizontal position.
V POS: Adjust the vertical position.
CLOCK: Adjust the input signal clock.
PHASE: Adjust the input image phase.
hStart: Adjust the horizontal start.
vStart: Adjust the vertical start.
Note
Only comments to professional operator.
INPUT MODE: Choose VGA or YPbPr.
ADC ADJUST：Brightness auto adjusting.
SDI ADJUST: When SDI input signal image shift, please adjust image ’s H
POS and V POS to display in full screen image.
Sub menu as follows:
H POS: Image horizontal position.
V POS: Image vertical position.
BRIGHTNESS RED: It can change the image brightness via
BRIGHTNESS RED setting.
BRIGHTNESS GRN: It can change the image brightness via
BRIGHTNESS GRN setting.
BRIGHTNESS BLUE: It can change the image brightness via
BRIGHTNESS BLUE setting.