RGBLink VSP 5162PRO - Manual (Page 33)

2. Hardware Orientation
VSP 5162PRO Front Panel
VSP 5162PRO User Manual 33
Preview button 3. Push the button, its LED light turns on, preview signal will
be switched to channel 3.
Preview button 4. Push the button, its LED light turns on, preview signal will
be switched to channel 4.
DVI3 input signal button, push the button, its LED light turns on, preview
output will be switched to DVI3 signal.
SDI1 input signal button, push the button, its LED light turns on, preview
output will be switched to SDI1 signal.
Function
Black button is an additional input video source. Push the [BLK] button,
and then push [TAKE] or [CUT] button, the LED lights turn on and the
program output will be switched to black. Push the [BLK] button again to
disable BLK signal and video processor returns to original preview output.
Test Pattern button, push the button to enable the test pattern function.
Test pattern can be set and selected from OLED panel, push the button
again to disable the test pattern function.
Note
TP is in the form of Color Bar and with the
resolution of 1024x768x60. Test pattern is used
to check whether the output is OK without the
inputs, and can use to qualify the output quality
and display quality.
—>PROGRAM OUT TP ON
PREVIEW OUT TP ON