Communication software guideline – RGBLink VSP 5162PRO User Manual

Page 67

5. Communication Software Guideline

How to

Connect Windows Control Program by LAN Interface

VSP 5162PRO User Manual 67

First, install the upper computer software in the computer.

Connect VSP 5162PRO and computer with cable, the connection diagram

is as follows:

Power on VSP 5162PRO, start the network function, specific steps are as

follows: MENU--SYSTEM -- ETHERNET -- NETWORK, select ON, and

check the IP address of the equipment, confirm if it is consistent with the

computer, such as 192.168.0.***, take 192.168.0.100 for example.

Open the upper computer software, click

, interface is shown as

follows:

Choose [Ethernet]: