RGBLink VSP 5162PRO - Manual (Page 105)

VSP 5162PRO User Manual 105
C. Software Upgrade
Application Upgrade
The VSP 5162PRO software upgrade steps are as follows:
1. Communication Board Upgrade
Communication board upgrade by USB port, and detailed upgrade steps are as follows:
(1) Connect the USB interface of VSP 5162PRO to the computer with a USB cable.
(2) Plug in the power cord, and make sure the device is in normal operation.
(3) Push the [MENU] button, and enter [USB UPDATE] option, operation steps are:
MENUSYSTEMUSB UPDATASEL.
(4) Open the USB drive that plug into the computer, and delete the "firmware. Bin" file in
the USB drive, then copy the 100M file of VSP 5162PRO to the USB drive, program
loading is complete after the file has been copied.
(5) Restart the device, and enter the menu to check if the version is right, factory reset is
completed. Operation steps are: MENUSYSTEMSYSTEM INFOMCU VER.
2. Fireware Upgrade
Fireware upgrade by personal computer, the form of the file is: .bin, and detailed
upgrade steps are as follows:
1. Connect the device to the PC with a RS-232 serial line or USB cable. Then double
click the software: UpdateProgram.exe .