Draytek 2900 - Manual (Page 66)

Vigor2900 Series User’s Guide 60
Service Name Enter the description of the specific network service.
Protocol Select the transport layer protocol (TCP or UDP).
Public Port Specify which port can be redirected to the specified Private IP and
Port of the internal host.
Private IP Specify the private IP address of the internal host providing the
service.
Private Port Specify the private port number of the service offered by the internal
host.
Active Check this box to activate the port-mapping entry you have defined.
Note that the router has its own built-in services (servers) such as Telnet, HTTP and FTP etc.
Since the common port numbers of these services (servers) are all the same, you may need to
reset the router in order to avoid confliction.
For example, the built-in web configurator in the router is with default port 80, which may
conflict with the web server in the local network, http://192.168.1.13:80. Therefore, you need
to change the router’s http port to any one other than the default port 80 to avoid conflict,
such as 8080. This can be set by the Management Setup in the System Management group.
You then will access the admin screen of by suffixing the IP address with 8080, e.g.,
http://192.168.1.1:8080 instead of port 80.