Draytek 2900 User Manual
Page 147
Vigor2900 Series User’s Guide
141
Settings in Router B in the remote office:
1.
Choose VPN and Remote Access Setup on the Advanced Setup group.
2.
Select Remote Access Control Setup. The following page will appear. Enable the
necessary VPN service and click OK.
3.
Then, return to VPN and Remote Access Setup page and choose PPP General Setup.
4.
For using PPP based services, such as PPTP, L2TP, you have to set general settings in
PPP General Setup.
For using IPSec-based service, such as IPSec or L2TP with IPSec Policy, you have to
set general settings in IPSec General Setup, such as the pre-shared key that both parties
have known.