4 tone settings – Draytek 2900 User Manual
Page 117
Vigor2900 Series User’s Guide
111
Dial Tone Power Level
This setting is used to adjust the loudness of the dial tone. The
smaller the number is, the louder the dial tone is. It is
recommended for you to use the default setting.
Ring Frequency
This setting is used to drive the frequency of the ring tone. It is
recommended for you to use the default setting.
3
3
.
.
1
1
0
0
.
.
4
4
T
T
o
o
n
n
e
e
S
S
e
e
t
t
t
t
i
i
n
n
g
g
s
s
This setting is provided for fitting the telecommunication custom for the local area of the
router installed. Wrong tone settings might cause inconvenience for users. To set the sound
pattern of the phone set, simply choose a proper region to let the system find out the preset
tone settings and caller ID type automatically. Or you can adjust tone settings manually if you
choose User Defined. TOn1, TOff1, TOn2 and TOff2 mean the cadence of the tone pattern.
TOn1 and TOn2 represent sound-on; TOff1 and TOff2 represent the sound-off.
Region
Select the proper region which you are located. The common
settings of Caller ID Type, Dial tone, Ringing tone, Busy
tone and Congestion tone will be shown automatically on the
page.
Also, you can specify each field for your necessity. It is
recommended for you to use the default settings for VoIP
communication.
Caller ID Type
There are several standards provided here for displaying the
caller ID on the panel of the telephone set. Choose the one that
is suitable for the phone set according to the area of the router
installed. If you don’t know what standard that the phone set