Draytek 2900 User Manual
Page 148
Vigor2900 Series User’s Guide
142
5.
Return to VPN and Remote Access Setup page and choose LAN-to-LAN Profile
Setup. Click on one index number to edit a profile.
6.
Set Common Settings as shown below. You should enable both of VPN connections
because any one of the parties may start the VPN connection.
7.
Set Dial-Out Settings as shown below to dial to connect to Router B aggressively with
the selected Dial-Out method.
If an IPSec-based service is selected, you should further specify the remote peer IP
Address, IKE Authentication Method and IPSec Security Method for this Dial-Out
connection.