Draytek 2900 User Manual
Page 152
Vigor2900 Series User’s Guide
146
For using IPSec-based service, such as IPSec or L2TP with IPSec Policy, you have to set
general settings in IKE/IPSec General Setup, such as the pre-shared key that both
parties have known.
5.
Return to VPN and Remote Access Setup page and choose Remote User Profile Setup
(Teleworker). Click on one index number to edit a profile.
6.
Set Dial-In settings as shown below to allow the remote user dial-in to build VPN
connection.
If an IPSec-based service is selected, you may further specify the remote peer IP
Address, IKE Authentication Method and IPSec Security Method for this Dial-In