Rena T-750 User Manual
Page 33

SETUP AND OPERATION
If the Backlight soft key is pressed.
Status: Advanced
V-Tab Backlight More… EXIT
0%
50%
1
IIIIIIIIIIIII
00%
IIIIIIIIIIIIIIIIIIIIIIII
Æ EXIT
Status: Advanced
50%
Å
The display will show the current backlight
intensity setting.
50% - This soft key is used to set the
backlight intensity to 50%.
Å - This soft key is used decrease the
backlight intensity.
Æ - This soft key is used increase the
backlight intensity.
EXIT – Brings you back to the previous
screen.
If the More… soft key is pressed.
The following choices will be displayed:
Keyboard – Used to test the keyboard
controls (keys).
Version – Displays the Lifetime Products
counter, Lifetime Tabs counter and BIOS
version.
More… - Displays additional Advanced
Menu choices (Voltage and Offset)
.
Voltage = current power supply voltage
outputs (V1=12, V2=5, V3= 3.3, V4=1.5)
Offset = Allows you to compensate for
electro/mechanical differences in the system,
in order to achieve more accurate tab positioning.
For example if you manually set the tab position to 1” and it is being applied at 1.25”,
then you should reduce this offset value by 0.25” to get more accurate tab placement.
Status: Advanced
V-Tab Backlight More… EXIT
Status: Advanced
Keyboard Version More… EXIT
EXIT – Brings you back to the previous screen.
33