Remotec ZTS-110 V3.14 - Manual (Page 15)

15
selection.
Press “Prog＂ key to confirm
your settings.
‐ it will go back to Home page if
selected “YES”.
‐ it will go to Day setting if selected
“no＂.
EASY mode (default)
Local control active functions:
• Change Mode
• Change Fan mode
• Temperature Scale selection
Local control inactive functions:
• Scheduling
• Program Mode
• Clock Display
• Setting Time
• Setting Swing
• Setting Differential Set‐Point
• Advanced Recovery Mode
EASY mode is deactivated
• Support full functions at local
and Z‐Wave control
2
Day will keep flashing, press
Up/Down key to set day from
MO‐SU.
3
Press “Prog＂ key once to
confirm the setting and it will go to
hour setting.
Hour will keep flashing, press
Up/Down key to set hour.