Remotec ZTS-110 V3.14 - Manual (Page 13)

13
Activate/Deactivate Easy Mode
The ZTS‐110 is default with Easy mode, below illustrates the functions of Easy mode:
• Active functions: Change Mode, change Fan mode and Temperature Scale selection
• Inactive functions: Scheduling, Program Mode, Clock Display, Setting Time, Setting Swing, Setting,
Differential Set‐Point and Advanced Recovery Mode
User can use Easy mode to disable Schedule function and the schedule will be controlled by Z‐Wave
gateway. User can still change temperature and mode by pressing the local physical buttons.
User can deactivate the Easy mode by local “Setting Mode” or Z‐Wave Configuration Parameter number
8. (Please refer to Z‐Wave Configuration parameters table).
Below is the example by local setting:
Step Procedure / Description LCD indication
1
Press and hold “Mode” key for 2
seconds to entry the setting mode.
It will display “EASY YES” if it stays
in Easy mode. Otherwise,
it will display “EASY no” if Easy
mode is deactivated.
Press Up/Down key to toggle the
selection.
Press “Prog＂ key to confirm
your settings.
‐ It will go back to Home page if
selected “YES”.
‐ it will go to Day setting if selected
“no＂.
Temperature Scale selection in Easy Mode
Step Procedure / Description LCD indication
1
Press and hold “Prog＂ keys for
2 seconds to entry temperature F
(Fahrenheit) ‐> C (Celsius) selection
mode.
Press Up/Down key to toggle the
temperature F (Fahrenheit) ‐>
C (Celsius) selection.
⇓