REMKO WPM-Smart-Control-Manual for specialists-WKF-085 - Manual (Page 7)

2 Operation - General
2.1 Design and functions
Overview of the controls
3
4
5
4
6
7
1
2 2
Fig. 1: Controls of the Smart-Control
1: SD card
2: Movement indicator
3: Display
4: Softkeys
5: Rotary knob
6: Info key
7: Menu key
Function of the keys
The softkeys underneath the display fulfil different
functions. The current function (e.g. Cancel, OK or
Edit) appears on the display, right above the
respective key. If nothing is shown on the display
above a softkey, this key does not have a function
assigned in the currently active mode.
The softkeys and rotary knob are also used for
navigation purposes. By pressing the right softkey
and turning the rotary knob, you can select the
menu items, allowing you to go deeper into the
menu structure. Pressing the left softkey multiple
times takes you back to the home screen (3D
house icon).
Pressing the Info key (6) delivers information and
support at any time on the area currently selected.
Pressing the Menu key (7) takes you to the main
menu.
The rotary knob (5) allows you move through the
menu. In addition, after selecting a parameter, the
rotary knob can be used to modify the value.
5
6
7
Fig. 2: Function of the keys
Selecting user / expert mode
NOTICE!
The settings in expert mode may only be con-
figured by REMKO-authorised installers!
There are two different authorisation levels for the
main menu: user mode and expert mode. Some
settings are only visible in expert mode. The
authorisation levels are identified by icons.
A B
Fig. 3: The user and expert icons
A: User; B: Expert (password-protected)
Briefly press the menu key to access the main
menu for the user.
Press and hold the menu key for 5 sec. to access
the main menu for the expert. Then enter the
expert password.
7