REMKO HGM-HGU - Manual (Page 10)

2.4 Pump unit data
Technical data
Pump group HGM / HGU
Pump type Wilo Stratos Para 25 / 1-7 T1
Maximum delivery volume m 3 4.5
Maximum delivery height m 7.0
Speed rpm 1200 - 4450
Mains voltage 1~230V ± 10% in accordance with DIN IEC 60038
Energy Efficiency Index ( EEI ) £ 0.23
Frequency Hz 50/60 Hz
Insulation class F
Enclosure class IP 44
Rated input P1 W 5 - 70
Nominal width for pipe connection Rp
Inch
es
1"
Connection flange thread G
Inch
es
1 1/2"
Permitted ambient temperature °C + 40
Maximum relative humidity £ 95%
Permitted conveying media
Heating water (in accordance with VDI 2035/VdTÜV
Tch 1466)
Water/Glycol mixture: maximum mixture ratio is 1:1 (in
mixtures with Glycol, the delivery data of the pump
must be corrected according to the higher viscosity and
depending on the mixture ratio percentage.)
Ethylene/propylene glycol with corrosion protection
inhibitors
- Standard oxygen binding agent
- Standard corrosion protection agent
- Standard combination products
- Standard cooling brines
Permitted medium temperature °C 95
Maximum operating pressure at the pump bar 6.0
Weight kg 2.4
REMKO PUMP GROUPS HGM / HGU
10